Related Manuals for Samsung SU33xx SERIES
Summary of Contents for Samsung SU33xx SERIES
-
Page 1: Vacuum Cleaner
SU33XX SERIES Vacuum Cleaner user manual English imagine the possibilities Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www.samsung.com/global/register... -
Page 2: Safety Information
Safety information IMpORTANT SAFETY INSTRUcTIONS Thank you for purchasing a Samsung vacuum cleaner. When using an electrical appliance, basic precautions should always be followed, including the following : PLEASE READ ALL WARNINGS AND INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. WARNING : To reduce the risk of fire, electric shock, or injury. -
Page 3: Table Of Contents
Safety information SAFETY INFORMATION • Before operating the appliance, please read this manual thoroughly and retain it for your reference. WARNING • Because these following operating instructions cover various models, the characteristics of your vacuum cleaner may differ slightly from those described in this manual. WARNING CAUTION/WARNING SYMBOLS USED Indicates that a danger of death or serious injury exists. -
Page 4: Product View
Assembling the cleaner pROdUcT VIEw Handle *option Bracket Brush Cord Clip (Select Models Only) Hose Clip *option Mini Turbo Brush Stretch Quick (Select Models Only) Hose Release Cord Wrap Crevice Tool REMOVABLE CREVICE Carrying Power TOOL Handle Cord Extension Wand Power Grille Switch... -
Page 5: Attach Handle To Vacuum
Assembling the cleaner ATTAcH HANdlE TO VAcUUM 1. Stand the vacuum upright and slide the base of the handle firmly into the grooves at the top of the vacuum body. 2. Check to be sure the handle is fitted to the vacuum body. -
Page 6: Power Switch
Operating the cleaner pOwER SwITcH The Power Switch is located on the side of the vacuum. Push the rocker switch "ON" to vacuum, and "OFF" when cleaning is complete. HANdlE pOSITIONS Press the handle release pedal, located on the lower left side of the vacuum, with your foot to place your vacuum ①... -
Page 7: Special On-Board Tools
Operating the cleaner SpEcIAl ON-bOARd TOOlS Your vacuum is not only a powerful carpet and rug cleaner, it’s also a versatile above floor vacuum cleaner when you select one of the special tools. 1. Raise Handle to Upright Position. 2. Grasp the end of the Hose Wand and lift Hose Wand to separate from the Hose Wand Base. -
Page 8: Empty Dust Bin
Maintenance To maintain maximum cleaning performance, the following maintenance steps must be performed: WARNING 1. Empty the Dust Bin when the dirt reaches the “MAX” line on the side. To reduce the risk of electronic 2. Cleaning the Grille Cyclone when the Dust Bin shock, turn Power Switch OFF become clogged. -
Page 9: Cleaning The Pre-Motor Filter
Maintenance clEANINg THE pRE-MOTOR FIlTER Sponge Filter Micro Filter < washable > 1. Unplug the Vacuum Cleaner from electrical outlet. 2. The Pre-Motor Filter(Sponge Filter, Micro Filter) protects the motor from dirt particles. It is located underneath the Dust Bin. If the Pre-Motor Filter becomes dirty, remove and clean it. -
Page 10: Check Rotating Brush And Drive Belt
Maintenance cHEck ROTATINg bRUSH ANd dRIVE bElT You should check your vacuum cleaner’s Rotating Floor WARNING Brush and Drive Belt regularly for wear or damage. You should also clean the brush and brush ends of strings, To reduce the risk of injury hair, and carpet fibers. -
Page 11: Mini Turbo Brush
Maintenance MINI TURbO bRUSH brushbar Replacement 1. Remove the tool from the hose, and turn upside down. Slide the switch to unlock position and remove bottom plate. 2. Unscrew the one screw and remove belt guard. 3. Remove brushbar including end plates and discard. 4. - Page 12 • Pull out and re-attach Dust Bin correctly This Vacuum cleaner is approved the following. Electromagnetic compatibility directive : 2004/108/EEc low Voltage directive : 2006/95/Ec If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. COUNTRY CALL...