1) Joint 2 SCREWs.
7
1) Pass LCD module F-PCB through REAR's
7
aperture.
2) By pressing hinge, combine FOLDER
and FRONT.
1) Be careful of the damage of appearance and scratch.
2) When pass home, observe as F-PCB does not damage.
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
Exploded View/Disassembly&Assembly Instructions
1) Attach SCREW COVER.
8
1) Set KEYPAD safely to FRONT.
8
1) Confirm whether KEYPAD matches rear exactly, when
KEYPAD be set.
5-9