Samsung SGH-T619 Service Manual page 25

1) Remove dust prevention TAPE.
5
1) Pay attention to FPCB crack and CONNECTOR damage.
2) Take care lest BGA parts breakdown should occur.
1) Remove SCREW COVER.
7
1) Remove using tweezers.
2) Be careful of the damage of appearance and scratch.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View/Disassembly&Assembly Instructions
1) Separate FRONT from FOLDER by pressing
6
FOLDER hinge.
Pressing
hinge.
1) When separate, observe in FRONT warp.
2) Take care of be tearing LCD and CAMERA FPCB.
3) Be careful of the damage of appearance and scratch
1) Disjoint 2 SCREWs.
8
1) Be careful of the damage of appearance and scratch
5-5
Notice
warp