Recording; Listening Through A Receiver (Home Theatre) - Samsung 5 series User Manual

TV Remote Control Buttons Available in Anynet + Mode
Device Type
Anynet + Device
Device with built-in
Tuner
Audio Device
The Anynet + function only works when the active source on the TV remote control is set to TV.
N
The ∏ button works only while in the recordable state.
N
You cannot control Anynet + devices using the buttons on the TV. You can control Anynet + devices only using the TV remote
N
control.
The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet + device.
N
The Anynet + functions do not operate with other manufacturers' products.
N
The π, μ operations may differ depending on the device.
N

Recording

¦
You can make a recording of a TV programme using a Samsung recorder.
. Press the TOOLS button. Press the ENTERE button to select Anynet + (HDMI-CEC).
. Press the ▲ or ▼ button to select Recording Immediately and press the ENTERE
button. Recording begins.
When there is more than one recording device
N
When multiple recording devices are connected, the recording devices are listed.
Press the ▲ or ▼ button to select a recording device and press the ENTERE
button. Recording begins.
When the recording device is not displayed select Device List and press the red
N
button to search devices
. Press the EXIT button to exit.
You can record the source streams by selecting Recording: (device_name).
N
Pressing the ∏ button will record whatever you are currently watching. If you are watching video from another device, the
N
video from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an
N
antenna to a recording device, refer to the recording device's users manual.

Listening through a Receiver (Home theatre)

¦
You can listen to sound through a receiver instead of the TV speaker.
. Press the TOOLS button. Press the ENTERE button to select Anynet + (HDMI-CEC).
. Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off.
. Press the EXIT button to exit.
If your receiver supports audio only, it may not appear in the device list.
N
The receiver will work when you have properly connected the optical in jack of the
N
receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV.
When the receiver (home theatre) is set to On, you can hear sound output from the
N
TV's Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out
5.1 channel sound to the Home theatre receiver. When the source is a digital component such as a DVD and is connected
to the TV via HDMI, only 2 channel sound will be heard from the Home Theatre receiver.
If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power
N
failure), the Speaker Select may be set to External Speaker when you turn the TV on again.
[550_Aus]BN68-01895D-02Eng.indb 32
Operating Status
After switching to the device, when the
menu of the corresponding device is
displayed on the screen.
After switching to the device, while playing
a file
After switching to the device, when you
are watching a TV programme
When Receiver is activated
English - 
Available Buttons
Numeric buttons
▲/▼/◄/►/ ENTERE buttons
Colour buttons / EXIT button
π(Backward search) / μ(Forward search) /
∫(Stop) / ∂(Play) / ∑(Pause)
P > / P < button
Volume / MUTE button
View TV
Device List
Record
DVDR Menu
DVDR Operation
Receiver
Setup
U Move E Enter R Return
View TV
Device List
Record
DVDR Menu
DVDR Operation
Receiver
Setup
U Move E Enter R Return
: DVDR
: DVDR
: Off
2009-09-16 11:13:01