Table of Contents
Advertisement
The Output Is Too Light
Problem
The output is too light.
NOTE:
•
If the problem continues even though you have taken suggested actions described above, contact the Fuji
Xerox local representative office or an authorised dealer.
195
Troubleshooting
Action
The toner cartridge may be low or need to be replaced. Confirm the
amount of toner in the toner cartridge.
1
Check the Estimated Toner Level on the Consumables tab in the
Printer Status window.
2
Replace the toner cartridge as necessary.
Verify that the print media is dry and the correct print media is used.
If not, use the print media recommended for the printer.
See also:
• "Usable Print Media" on page 69
Try changing the Paper Type setting in the print driver.
On the Paper/Output tab in Printing Preferences of the print driver,
change the Paper Type setting.
Disable Toner Saving Mode in the print driver.
1
On the Graphics tab in Printing Preferences of the print driver,
ensure that the Toner Saving Mode check box is not selected.
- Quick Links:
- Print and Scan Drivers
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DocuPrint M205 b and is the answer not in the manual?
Questions and answers
Trying to unjam paper on exit Docuprint M205b Cannot see any paper in the rear. Can see some from the front but cannot reach it . How do you take the top off the machine to remove paper.