Epson EMP-TS10 Setup Manual page 20

Name and function of the projector operating panel buttons
[Power] button
Turns the projector power on and off.
[Computer/YCbCr] button
Changes the image source between the Computer 1 port
and the Computer 2/Component Video port.
[Menu] button
Displays or hides the menus.
[V-Keystone] button
Press this button if the projected image has vertical
keystone distortion.
If you press and hold the [Shift] button while pressing
this button, you can adjust the synchronization of
computer images.
[Shift] button
This button does not function by itself. Press and hold
this button while pressing either [Keystone] button to
activate the function that is printed in orange on the
control panel (Sync or Tracking).
[A/V Mute] button
Turns off the audio and video.
Power
Help
Computer/YCbCr Video
Source
Menu Esc
Sync+
Tracking - Tracking +
Auto
Keystone
Shift
Sync-
Resize
A/V Mute Volume
[Help] button
Displays the online help menu to assist you if you have
a problem.
[Video] button
Changes the image source between the Video port and
the S-Video port.
[Esc] button
Press to cancel the function currently being used.
Pressing [Esc] while viewing an environment setting
menu or the online help displays the previous screen or
menu.
[Auto] button
Automatically adjusts the computer image to the
optimum image.
Functions as an button when an environment setting
menu or help screen is being displayed. Press to select
an item and proceed to the next screen.
[H-Keystone] button
Press this button if the projected image has horizontal
keystone distortion.
If you press and hold the [Shift] button while pressing
this button, you can adjust the tracking of computer
images.
[Resize] button
Changes the aspect ratio.
[Volume] button
Adjusts the volume of the built-in speaker.