Personalise your device
Set tones in Profiles
Press
, and select
You can use profiles to set and customise the
ringing tones, message alert tones, and other tones
for different events, environments, or caller groups.
To change the profile, select a profile, and
Options
> Activate, or press the power key in the
standby mode. Scroll to the profile you want to
activate, and select OK.
Tip: To switch between the general and silent
profiles in the standby mode, press and hold
#.
To modify a profile, scroll to the profile, and select
Options
> Personalise. Scroll to the setting you
want to change, and press the scroll key to open the
choices. Tones stored on a compatible memory card
(if inserted) are indicated with
If you want to set a profile to be active a certain
time, select
Options
expires, the profile changes back to the previously
active one. When a profile is timed,
in the standby mode. The Offline profile cannot be
timed.
54
Tools
> Profiles.
.
> Timed. When the set time
is displayed
In the tones list, select
Download sounds
service) to open a list of bookmarks. You can select
a bookmark and open a connection to a web page
to download more tones.
If you want the caller's name to be spoken when
your device rings, select
Say caller's name
> On. The caller's name must
be found in Contacts.
To create a new profile, select
new.
3-D tones
Press
, select
Tools
>
With 3-D tones, you can enable three-dimensional
sound effects for ringing tones. Not all ringing tones
support 3-D effects.
To enable the 3-D effects, select
effects
> On. To change the ringing tone, select
Ringing tone
and the desired ringing tone.
To change the 3-D effect that is applied to the
ringing tone, select
Sound trajectory
desired effect.
To modify the effect, select from the following
settings:
(network
Options
Personalise
>
Options
Create
>
Utilities
3-D
tones.
>
3-D ringing tone
and the
>