Optipoint 500 Acoustic Adapter - Siemens optiPoint 500 Service Manual

Option Adapters and Ports

optiPoint 500 acoustic adapter

5.2 optiPoint 500 acoustic adapter
A local power supply unit is required when using the acoustic adapter.
>
You can connect the following to this adapter:
External speakers and desk microphone over Y cable,
●
Cord-connected headset (121 TR9-5) or
●
Cordless headset
●
(121 TR 9-5*) with call acceptance/cleardown function from mobile units,
Floating contact
●
to busy display/door opener and secondary bell/visual paging with own power supply.
It is intended for use with the following systems:
Hicom150 E/150 H
HiPath AllServe 150
HiPath 3000
Hicom 300 H/300 E
HiPath 4000
Note on the advance Model
This model has an integrated headset port on the underside of the device.
Notes on the acoustic adapter
When using an external microphone and an external speaker, the internal components are
●
switched off in speakerphone mode (sense lead).
The type of telephone determines the handsfree operation. Microphones which are con-
●
nected to the acoustic Adapter will not be supported by optiPoint 500 basic. Except for call
signaling, external devices have priority over internal devices.
In the mute audio function, the internal microphone, the transmitter insets, and a micro-
●
phone connected to the acoustic adapter are switched to mute.
5-4
basic standard
●
●
●
●
●
Nur für den internen Gebrauch
advance
●
●
● ●
● ●
● ●
P31003-E8400-A100-3-7620
Service Manual