Vaillant VRT360f Quick User Manual

Vaillant VRT360f quick user guide for end users
Current room
temp
"Program"
button
"Function"
button

Operating modes

Timed - heating will operate to the programmed ON and OFF periods.
Constant - heating will operate continuously irrespective of programmed times.
Setback - heating is operating at the "ECO" temperature
OFF
-
heating is permanently off
Note: The above symbols could be shown together e.g
ON.

Setting the operating mode

From the basic screen press the "Click and Turn" knob one click, one of the operating mode
symbols will flash. Whilst the symbol is flashing rotate the knob to select the desired operating
mode. The operating mode is set and the symbol will stop flashing after 5 seconds.

Setting the target room temperature

From the basic screen rotate the "Click and Turn" knob 1 one click clockwise. The current target
temperature is shown flashing. To adjust the target temperature rotate the knob clockwise to
the new desired target temperature, the display will return to the basic screen in approx 5
seconds.

Override function

From the basic display push the "F" button once. The
flashing temperature, rotate the knob to set the desired temperature for the override period.
This mode will be active until the next time window. To turn off the override function simply
press the "F" button, the display will revert back to the basic display after approximately 10
seconds.
Note: The time and date should have been set-up by your installer, if necessary refer to
installation manual for details of how to set time & date
Basic Display
symbol is displayed together with a
Operating mode
Main function "Click
and Turn knob"
indicates heating is timed and