Suspension Setting Chart
LOADING
FRONT
Spring
Rebound
Pre-Load +
Damping*
Solo
Standard
10
1.50
Riding
Softer
11
2.00
Firmer
9
1.00
Rider and
8-9
0.50
Passenger or Rider
and Luggage
Rider, Passenger
7-8
0.50
and Luggage
+ mms above fork cap.
* Number of adjuster turns out from the fully screwed in
position.
** Number of clicks out from the fully screwed in position.
Note:
•
This chart is only a guide. Setting
requirements may vary for rider
weight and personal preferences.
See the following pages of how to
adjust your suspension.
Maintenance and Adjustment
Front Suspension Settings
The standard suspension settings provide a
comfortable
REAR
characteristics for general, solo riding. The
Spring
chart shows suggested settings for the front
Pre-Load **
and rear suspension.
25.00
29.00
21.00
Ensure that the correct balance between
15.00
front and rear suspension is maintained.
Suspension imbalance could significantly
change handling characteristics leading to
05.00
loss of control and an accident. Refer to the
chart on the previous page for further
information or consult your dealer.
The front suspension is adjustable for
pre-load only. The spring pre-load adjusters
are located at the top of each fork.
Ensure that the adjusters are set to the
same setting on both forks. Settings which
vary from left to right could significantly
change handling characteristics leading to
loss of control and an accident.
Note:
•
The setting figures above/over are
all measured as adjuster turns
from the fully screwed in position.
ride
and
good
handling
Warning
Warning
87
Need help?
Do you have a question about the Sprint ST and is the answer not in the manual?
Questions and answers
Are there any more locations on the bike where there are more fuses?
Yes, the Triumph Sprint ST has an additional 30 Amp fuse attached directly to the starter solenoid beneath the rider's seat.
This answer is automatically generated
@Mr. Anderson