BASIC OPERATIONS
Receiving Documents via LAN
Internet Fax Ledger Size Document Transmission
When transmitting via LAN, the transmitter is incapable of identifying the receiver's recording paper size
capability, and thus it will not reduce the document size during transmission. Therefore, it is recommended
that you send only A4/Letter size documents for LAN transmission. If a Ledger size document is transmitted
and the receiver is only able to print A4/Letter size documents, the communication will fail when the temporary
setting "07 LEDGER EMAIL XMT" of the Select Mode is set to its default position (ON).
To send without reduction, follow the steps below.
Make sure that the INTERNET lamp is ON. If not, press
1
a
Place original(s) face up on the ADF.
or
1
b
Place a book or an original face down on the Platen
Glass.
2
3
4
72
to select the "INTERNET MODE".
SELECT MODE
ENTER NO. OR
LEDGER EMAIL XMT=OFF
1:OFF 2:ON
LEDGER EMAIL XMT=ON
1:OFF 2:ON
(1-8)
∨ ∧