Using A Pc To Update The Auto Dialer Remotely - Panasonic DP-2000 Operating Instructions Manual

Programming or Retrieving Parameters via Email

Using a PC to Update the Auto Dialer Remotely

This feature provides a convenient and an easy way to Update, Backup or Restore the Phone Book dialing
numbers right from your PC by sending a text email message to the DP-2000.
The DP-2000 interprets the command that you enter in the "Subject" line of your email message and performs
one of the following functions, it Retrieves or Stores data into the Auto Dialer (Phone Book).
The two types of commands that can be entered in the "Subject" line of your email:
1) To Store data, type :#set abbr(password)# : where the password is the Remote Password programmed in
2) To Retrieve data, type :#get abbr(123456789)#
(see Note 1)
NOTE
1. To activate this feature, change the Fax Parameter No. 158 (PC REMOTE UPDATE) to "Valid".
(See page 58).
INSTALLING YOUR MACHINE
the DP-2000's User Parameters (i.e. 123456789). You can
program any known unused Auto Dialer location(s) with this
command for the first time, without having to Retrieve the
Phone Book data first. If the desired Auto Dialer location
already contains data, the DP-2000 will overwrite the
existing data, therefore, we recommend that you use the
Retrieve command below instead. To edit existing Auto
Dialer locations, refer to pages 41 to 42.
35