Extension Name Set - Panasonic KX-TD308 User Manual

004
3.2
Description
Selection
Default
Programming
Conditions
3-14
User Programming (Manager Programming)
User Programming (Manager Programming)

Extension Name Set

Assigns names to the extension numbers programmed in program [003]
"Extension Number Set".
• Jack number: 1 through 8 (-1 / -2)
(-1 = first part, -2 = second part)
• Name: 10 characters (max.)
All jacks – Not stored
1. Enter 004.
Display: 004 EXT NAME SET
2. Press NEXT.
Display: Jack NO?
3. Enter a jack number.
To enter jack number 1, you can also press NEXT.
To select the second part (-2), press NEXT after entering a jack
number.
Display: #1-1:Not Stored
4. Enter a name.
For entering characters, see "Station Speed Dialing Number/Name
Assignment" in Section 2.2 "Station Programming".
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new name.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or SELECT and
the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
• There is a maximum of 16 names. Each name has a maximum of 10
characters.
• Program [003] "Extension Number Set" is used to assign extension
numbers.
• For an explanation of jack numbering, see "Rotation of jack number"
on page 3-5.