Panasonic KX-TD308 User Manual page 182

4.2 DPT Features
Clearing all message notifications by the message receiver
1
2
7 0
3
your extension number
Conditions
• The system supports a maximum of 16 simultaneous messages. If you try to set the
17th message, you will hear a reorder tone.
• A flexible button on the KX-T7250 (no MESSAGE button provided) can be assigned
as the MESSAGE button.
• If the MESSAGE button is neither provided nor assigned, dial tone 4* after going
off-hook informs you of a message waiting. For standard telephone users, a special
ring tone can be provided as notification.
• If multiple message notifications are left at your extension, call back is executed in
the order received.
• If you select a specific message to call back, call back is executed in the order
received, starting with the one selected.
• With the KX-T7431, KX-T7433, KX-T7436 and KX-T7235, you can set or cancel
this feature using the display operation.
Programming References
• Station Programming (Section 2)
Flexible CO Button Assignment — Message Waiting (MESSAGE) Button
(System Programming — [005] (Installation Manual) can be used for this assignment.)
• System Programming — Installation Manual
[216] Message Waiting Ring Interval Time
[990] System Additional Information, Fields (9), (40)
Feature References
KX-T7235 Display Features – System Feature Access Menu (4.4/Special Display Features)
KX-T7431 / KX-T7433 / KX-T7436 Display Features – System Feature Access Menu
(4.4/Special Display Features)
* One of the dial tones. Refer to the "Tone List" in the Appendix (Section 7).
1. Lift the handset or press the SP-PHONE/MONITOR button.
• You hear dial tone 4*.
2. Dial the feature number (70) and 0.
0
3. Dial your (message receiver's) extension number.
• All messages are cleared.
M
4-85
DPT Features