Upgrading The Firmware - Dymo LabelWriter Print Server User Manual

Upgrading the Firmware

You can upgrade your print server whenever new firmware becomes available.
We recommend that you only upgrade the firmware if you are instructed to do so by a DYMO
Technical Support representative or if you are experiencing a problem that has been identified as a
firmware issue.
This section describes how to upgrade the firmware for your print server.
To upgrade the server firmware
1
2
3
4
5
6
Click Maintenance on the left side of the Configuration page.
Click Download New Firmware.
The Support page of the DYMO Web site opens in your default Web browser.
Locate the print server firmware upgrade on the downloads page and follow the on-screen
instructions to download the new firmware to your computer.
On the Maintenance page, click Upgrade Firmware, and then click Browse.
Navigate to and select the firmware file that you downloaded, and then click Open.
Click Upload.
When the Print Server home page appears, the print server has been restarted and is upgraded
with the new firmware.
Upgrading the Firmware
23