Toshiba Strata CIX Programming Manual page 38

Telephone Button Programming
200 Series Programs
Table 1-15 BRI Bearer Capability of ISDN
Speech
3.1kHz Audio
7kHz Audio
Circuit Mode
Unrestricted Digital Information
Table 1-16 Programs 203~204
Button Sequence
203 Change DN
203 Hold
,
203-00 Primary DN
Hold
n,
203-01 Enter new DN
FB01 Hold
, n1,
204 DKT Parameters
204 Hold
,
204-00 Primary DN
Hold
n,
204-01 Station Type
FB01 Hold
, n,
204-02 Key Strip Pattern
FB02 Hold
, n,
204-03 Key Strip Type
FB03 Hold
, n,
204-04 Add on Modules
FB04 Hold
, n,
204-05 Tone 1st /Voice 1st
FB05 Hold
, n,
204-06 OCA Type
FB06 Hold
, n,
1-34
Bearer Services
Value(s)
n = Up to 5 digits
n1 = Up to 5 digits
Hold
,
n = Up to 5 digits
n = 1. Extension
2. Attendant
n = 1. Pattern1
2. Pattern2
3. Pattern3
4. None
n = 1~24
n = 1. None
2. One Unit
3. Two Units
n = 1. Tone
2. Voice
n = 1. Handset
2. Speaker
Bellcore
Nat'l ISDN
X
X
64 kbps X
Rate adaptation
X
from 56 kbps
2x64
This command changes DN.
Enter DN to change.
Enter new DN.
This command assigns DKT digital telephone data.
Primary DN
For CTX R1 this must be set to ìExtension.î The ìAttendantî option is
not available for this release.
Default key strip patterns for digital telephones. The selected Pattern
is applied to the ìKey Strip Typeî parameter (DKT3014 uses only
Pattern 1 or None).
•
None - applies PDN to button 01 and blank to all other buttons.
•
Pattern 1 - applies PDN to button 01, plus line buttons and DND.
•
Pattern 2 - applies PDN to button 01, plus line buttons, One-
Touch buttons and DND.
•
Pattern 3 - applies PDN to button 01 and blank to all other
buttons.
Apply 1, 3, 10, 14, or 20 button keystrip type to digital telephones.
•
1 and 3 button keystrips apply to DKT2001 and DKT3001.
•
10 button keystrips apply to DKT2010 and DKT3010.
•
14 button keystrips apply to the Large LCD DKT3014
•
20 button keystrips apply to DKT2020 and DKT3020.
The Number of Add-on Modules assigned to this station.
Set PDN to have Tone First or Voice First signaling when called.
For each iES32 PDN, set to ìTone Firstî, if set to Voice First iES32 will
not answer.
Select the OCA type. This field must be programmed with Auto OCA
Originate below.
Strata CIX/CTX Telephone Button Programming 11/04
ETSI TTC
X X
X X
X X
X X
X X
Summary