Show Lldp; Lldp (Link Layer Discovery Protocol) Commands - Fortinet 548B Administration Manual

Syntax
voice vlan data priority untrust | trust
Default Setting
trust
Command Mode
Interface Config
7.12

LLDP (Link Layer Discovery Protocol) Commands

7.12.1 Show Commands

7.12.1.1 show lldp

This command uses to display a summary of the current LLDP configuration.
Syntax
show lldp
Default Setting
None
Command Mode
Privileged Exec
Display Message
Transmit Interval: Shows how frequently the system transmits local data LLDPDUs, in seconds.
Transmit Hold Multiplier: Shows the multiplier on the transmit interval that sets the TTL in local
data LLDPDUs.
Re-initialization Delay: Shows the delay before re-initialization, in seconds.
Notification Interval: Shows how frequently the system sends remote data change notifications, in
seconds.
7.12.1.2 show lldp interface
This command uses to display a summary of the current LLDP configuration for a specific interface or for
all interfaces.
- 283 -