Table of Contents
Advertisement
Unfastening the outboard lap/shoulder belts
2. While the belt retracts, guide the tongue to
its stowed position. If you do not guide the
tongue, it may strike you or part of the
vehicle.
How to Untwist or Unjam a Safety Belt
Retractor
If you should jam the lap belt retractor by
allowing the belt to retract when it is twisted,
you can free the webbing with this procedure:
1. Pull on the belt with both hands to tighten it
on the retractor spool.
2. Feed the belt back into the retractor until it
is completely retracted. Repeat previous step
if necessary.
3. Pull the belt out of the retractor as far as it
will go and untwist the belt or remove the
object that is jamming the belt. Let the belt
retract.
4. Then, pull the belt out and let it retract
several times to make sure that the belt
works properly.
18
- Quick Links:
- Servicing Your F-Series
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Vehicle and is the answer not in the manual?
Questions and answers
Need starting sequence for 1992 ford f 150 5.0 l v8? Engine cranks but no start.
If the engine cranks but does not start on a 1992 Ford F-150 5.0L V8, follow this starting sequence:
1. Turn the ignition key to the OFF position.
2. Press the accelerator pedal all the way to the floor and hold it.
3. Turn the ignition key to the START position.
4. Release the ignition key when the engine starts.
5. Gradually release the accelerator as the engine speeds up.
This answer is automatically generated