Config Page - NEC SuperScript 1800 Network User's Manual

Config Page
Use the Config page for adjusting the paper tray settings for
the printer. From the Operator Panel Menu Settings, click
Config to view the Config page
.
Item Description
Personality Switches the printer between the PCL and
PostScript printer languages. Use Auto if
both types will be used.
Tray Lock Use to select which tray the printer should
not use when the original tray runs empty.
Power Save Use to select how much idle time must
pass before power save mode is entered.
Econo Mode Reduces the amount of toner used for
graphics in a print job.
Jam Recovery If set to Off, a jammed sheet will not be
reprinted.
Auto Continue If set to On, and the wrong paper size is
loaded, the printer will begin printing after
waiting 60 seconds.
Tray Switch If set to On, and a tray runs out of paper,
the printer will switch to a tray that
contains the same paper.
Low Toner If selected, printing will stop when toner is
low. Press GO to by-pass this control.
Operator Panel Pages 63