Troubleshooting Network Adapters - NEC Express5800/320Ma Software Installation And Configuration Manual

Configuring Teams of Network Adapters
5. Click OK to accept the changes.
6. In the Team Properties dialog box, click Close to process the new TCP/IP settings
and to close the dialog box.
7. Restart the PROSet utility and verify that the new IP address appears in the Team
Configuration tab for the team.

Troubleshooting Network Adapters

To troubleshoot Ethernet PCI adapters, you can perform general troubleshooting
procedures for the Express5800/320Ma system and procedures specific to Ethernet
PCI adapters. For information about general procedures for troubleshooting your
system, see its operation and maintenance guide. These procedures include viewing
messages in the event log, and checking system inventory from the ftServer
Management Console (ftSMC) for component status.
Troubleshoot Ethernet PCI adapters by:
•
Checking the network cables
•
Checking the status LEDs on the system, enclosure, and PCI slot
•
Verifying link data rate and mode
•
Using the PROSet utility diagnostics
For more information about troubleshooting Ethernet PCI adapters, see the
Express5800/320Ma: PCI Adapter Guide.
3-18 Express5800/320Ma: Software Installation and Configuration Guide
is connected. Select Obtain an IP address
automatically only if the network supports it.