Retaining Plates - Miele DA 226-2 Operating And Installation Manual

There are three retaining plates A, B
and C for fixing the cooker hood to the
wall.
First of all drill the holes for attaching
the canopy and for fitting retaining
plate A.
24
Before fitting the retaining plate draw
a vertical line centrally above the
hob on the back wall.
Mark measurement
surface upwards (see "Appliance
dimensions"). This marks the height
of the lower rim of the cooker hood.
Drill two 8 mm ø holes, one at
mm and one at
centre line for the retaining plate
(see "Appliance dimensions"). Insert
S8 plugs.
from the hob
+ 75
+ 400 mm on the