Showroom Programme; Resetting The Factory Default Settings - Miele CVA 5060 Operating And Installation Manual

On
You can switch the plate warmer on
and off manually whenever you want,
independently of the coffee machine.
Off
The plate warmer will not switch on
because the coffee machine is not
supplying it with any electricity. The
coffee machine is delivered with "Off"
as the default setting.
To switch the plate warmer on
independently of the coffee machine
You can switch the plate warmer on via
the coffee machine, even without the
coffee machine being switched on.
^ Touch the OK sensor whilst the
machine is off.
^ Select "Plate warmer" and touch the
OK sensor.
^ Select "Manual - on" and touch the
OK sensor.
The plate warmer is now switched on.
To switch the plate warmer off again,
proceed as above again, but select
"Manual - off" instead of "Manual -
on".
If you have forgotten to switch the
plate warmer off, it will switch itself
off automatically after a maximum of
9 hours.
Settings: Customising your machine

Showroom programme

This function enables the machine to be
illuminated in a showroom situtation
without the heaters working.
Resetting the factory default
settings
The "factory default" setting is used to
reset the various settings back to the
default status.
From here you can select whether to
reset all settings back to the default or
to delete any user profiles.
^ Select "Settings F" from the Main
Settings
Factory default
Back #
^ Use an arrow sensor to highlight
Various options will then be available:
menu, and then touch the OK sensor.
"Factory default", and then touch the
OK sensor.
39