Changing The Door Hinging - Miele KD 3528 Sed Operating And Installation Manual

The appliance is supplied right hand
hinged. If left hand door hinging is re-
quired follow these instructions.
^ Open the lower appliance door and
remove cover a.
^ Close the lower appliance door, un-
screw lower hinge bracket b, and
take the door off.
^ Take the washers and hinge pin c
out of the hinge bracket, then refit
them in the second hole in the hinge
bracket. (Use the spanner supplied
to unscrew and refit the hinge pin).
^ With the upper door closed, unscrew
upper hinge bracket e then take the
upper door g off.
^ Take the hinge pin d and bush f out
of the hinge bracket and refit them in
the neighbouring hole in the hinge
bracket.
^ Take plug a out of the door bearing,
and refit on the opposite side.
^ Unscrew bearing block c, turn it
around and fit it on the opposite side:
^ Use the spanner supplied to unscrew
the hinge pin b out of bearing block
c and refit it into the bearing block
from below.
33