Table of Contents
Advertisement
The stainless steel surface has a pro-
tective cover to prevent scratching dur-
ing transportation.
^ Do not remove this cover until the ap-
pliance has been installed or built in.
Start at one of the upper corners.
^ Clean the inside of the appliance and
the accessories with warm water and
a little washing up liquid and then dry
with a soft cloth.
Important: To ensure correct func-
tioning of the appliance, let it stand
for between ½ and 1 hour after
transporting it to its final location be-
fore connecting it to the mains.
^ Turn the temperature selector in a
clockwise direction away from "0".
The appliance will begin to cool. The in-
terior light in the refrigerator will come
on when the door is opened.
The higher the setting, the lower the
temperature in the appliance.
^ Turn the temperature selector in an
anti-clockwise direction from "1" back
to the "0" position.
The cooling system and the interior light
are now switched off.
10
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday
^ switch the appliance off at the mains,
^ withdraw the plug (pull on the plug
and not the cable),
^ defrost the freezer section,
^ clean the appliance out and
^ leave the doors ajar to air the appli-
ance.
If, during a long absence, the appli-
ance is switched off but not cleaned
out and the doors are left shut there
is a danger of mould and odours
building up inside the appliance.
Hide quick links:
Advertisement
Table of Contents
