Anti-Crease - Miele T 240 Operating Instructions Manual

Once a programme has ended, the
drum will turn at regular intervals for
approx. 60 minutes to prevent the
laundry from settling into creases or
folds.
The Anti-crease function
– is activated as standard ex-works. It
can be deactivated is wished.
– takes place in: COTTONS, MINIMUM
IRON, Warm air programmes.
– should be left activated, if laundry is
not normally removed immediately
after the end of a programme.
The programmable functions are acti-
vated with the help of the additional op-
tion buttons and the programme selec-
tor.
Before you begin, first ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is at Finish .
A Press the Low temperature and
Buzzer buttons at the same time,
keep them pressed in
and ...
B ... switch the dryer on with the I-On /
0-Off button.
C Then release these buttons.
– The Drying and Cool air sequence
indicator lamps will flash.
48
D Turn the programme selector to
COTTONS Hand iron r.
– If the Machine iron indicator lamp
lights up, the anti-crease function
.
– If the Machine iron indicator lamp
does not light up, the anti-crease
function
E Pressing the START button switches
between activating and deactivating
the anti-crease function.
F Switch the machine off with the
I-On / 0-Off button.
The setting you have selected is now
stored in memory. You can change it
again at any time.
^ Carry out steps A to D.
If the indicator lamp for Machine iron
lights up = Anti-crease
does not light up = Anti-crease
^ Switch off the dryer with the I-On /
0-Off button.
The check is complete.
.