Memory Function - Miele T 240 Operating Instructions Manual

The additional options selected previ-
ously for specific programmes are
stored in the machine's memory.
The machine is supplied ex-works with
the memory function switched off. It can
be activated is wished.
The programmable functions are acti-
vated with the help of the additional op-
tion buttons and the programme selec-
tor.
Before you begin, first ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is at Finish .
A Press the Low temperature and
Buzzer buttons at the same time,
keep them pressed in
and ...
B ... switch the dryer on with the I-On /
0-Off button.
C Then release these buttons.
– The Drying and Cool air sequence
indicator lamps will flash.
D Turn the programme selector to COT-
TONS Normal .
– If the Machine iron sequence indica-
tor does not light up, the Memory
function is
– If the Machine iron sequence indica-
tor does light up, the Memory func-
tion is
E Pressing the START button switches
between activating and deactivating
the Memory function.
F Switch the machine off with the I-On /
0-Off button.
The setting you have selected is now
stored in memory. You can change it
again at any time.
^ Carry out steps A to D.
If the indicator light for Machine iron
lights up = the Memory function
does not light up = the Memory func-
tion
^ Switch the machine off with the I-On /
0-Off button.
The check is complete.
.
.
47