To Remove The Catalytic Enamelled Back Panel, Side Panels And Roof Liner; Back Panel; Side Panels (If Fitted); Roof Liner (If Fitted) - Miele H 5681 B Operating And Installation Manual

Cleaning and care
To remove the catalytic
enamelled back panel, side
panels and roof liner
Make sure the oven heating
elements are switched off and cool.
Danger of burning.
See "Cleaning and care" for information
on cleaning.

Back panel

^ Remove the runners, together with
the catalytic side panels (if fitted).
^ Loosen the screws in the back panel
and take it out.
The oven must not be used without
the back panel fitted. This could
cause considerable injury.
Reassemble them in the reverse
order, making sure all parts are
correctly fitted.

Side panels (if fitted)

^ Remove the runners, together with
the catalytic side panels.
^ Remove the side panels from the
runners.
Reassemble them in the reverse
order, making sure all parts are
correctly fitted.
68

Roof liner (if fitted)

^ Remove the runners, together with
the catalytic side panels (if fitted).
^ Unscrew the wing nut.
^ Gently lower the element.
Do not use force to pull it down as
this can cause the element to break.
Take care when cleaning the ceiling
of the oven that you do not damage
the receiver for the food probe
located in the middle of the heating
element.
^ Take out the roof liner.
Reassemble them in the reverse
order, making sure all parts are
correctly fitted.
Make sure that the wing nut is
screwed back on properly.