Miele H 248 Operating Instructions Manual page 66

Table of Contents

Advertisement

Correcting minor faults
Installation, maintenance and re-
pairs to the electrical components
of this appliance should only be car-
ried out by a fully competent person
to ensure safety. Repairs and other
work by unqualified persons could
be dangerous. The manufacturer
cannot be held responsible for un-
authorized work.
Some minor problems however can be
dealt with as follows:
Check whether,
the selector switch is set to the func-
tion required,
control is set at the correct tempera-
ture.
the operating lock is activated.
the main fuse has blown. Contact a
qualified electrician or the Miele Ser-
vice Department.
The halogen lights are faulty. Change
as follows:
Turn off the electricity supply to the
oven. Switch off at the isolator, or
withdraw the mains fuse.
There is a slide flap in each side trim to
the oven.
66
the temperature
Slide the relevant flap upwards.
Pull out the metal strip.
Pull out the halogen lamp:
12 V, 20 W,
heat resistant up to 300°C, G4
socket, Osram, Type 64428.
Fit the bulb and
reverse order, carefully ensuring all
parts are in place.
in the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents