Miele KWL 4712 S ed Operating And Installation Manual page 32

Changing the door hinging
^ Close the door and align it both
vertically and horizontally.
^ Insert screw a into the outer hole of
hinge bracket b and tighten to
secure the hinge pin in the hinge
bracket.
32
Refitting the handle:
Please make sure you follow the
instructions below carefully when
you refit the handle. The door seal
will be damaged if the handle is
fitted incorrectly.
^ Loosely attach the handle to the
opposite side of the door with the two
front screws b.
Mounting plate c must be positioned
on the side of the door so that when the
door is closed it is flush with the side
of the appliance.
If this is not the case,
^ tighten both grub screws a with the
allen key provided until mounting
plate c lines up correctly.
^ Then tighten all 4 fixing screws b.
^ Slide the side section of the handle
d into the guides on the mounting
plate until it clicks into place.