Help Command - Mitsubishi Electric DX-PC10E Instruction Manual

10.1 Help Command

Help can be displayed by selecting the Help command in the Help menu.
10.2 About... Command
Information on the version of DX-PC10E being used can be accessed through the
About... command in the Help menu.
11 Zoom function
11.1 Specifying Zoom rate
Enlargement can be specified with any of the listed procedures below.
• E Specify zoom rate 100%, 200%, 400%, 800% or Fit in window using zoom
command in view menu.
• E Specify zoom rate within 25% - 800% in the Zoom combo box in the main window.
• E Specify the desired area by dragging in the Quick Zoom window.
• E Specify zoom rate rotating the wheel on Microsoft IntelliMouse (50% steps) while
holding down the ctrl key.
During zoom, the window appears as shown below. (fig. 11.1)
11.2 Zoom display position
Enlarged position can be shifted with any of the following procedures:
• E Scroll the display position using scroll bar.
• E Drag the window to the desired scroll direction.
• E Drag and specify the area in the Quick Zoom window.
Figure 11 Help menu
fig. 11.1 Zoom Function
28