Table of Contents
Advertisement
2. Network Camera Installation
2.1 Installation Order
Before operating this Network Camera, make sure to connect a network cable to power.
Users can add an alarm cable or an audio cable there depending on what operation
methods they choose.
As far as a camera-fixing stand is concerned, consult with an installer about its installation
locations.
2.2 Network Connection
4
4
5
5
2.2.1 Network Camera IP Assignment
Network Camera that is first connected to network basically has no IP address. So, it is
necessary to allocate the IP address of network camera with an IP allocation program.
Open the program folder installed with the provided CD and execute "IP Setting Utility".
3
The Network Camera supports
the operation through the
network. Therefore, it is
necessary to connect a
standard RJ-45 cable to it.
Generally a cross cable is used
for directly connection to PC,
while a direct cable is used for
connection to a hub.
1. MAC Address
- Enter MAC address of the
product for IP input.
2. IP Address
- Enter IP address to use.
3. Ethernet Adapter
- In case there are several network
cards, select a card to use for the
operation of network camera.
4. Start
- Allocate input IP to the network
camera to use. When a
completion message appears on
○
5 Status window in several
seconds or minutes, input
completes its process. You can
add additional IPs to other
devices continuously.
- 3 -
Advertisement
Table of Contents
