Table of Contents
Advertisement
6. To stop playback or still-frame playback, press the STOP button.
During still frame playback, to choose the desired video from the
SPLIT4 screen display and display the video of that camera number in
the single screen display, press the SEARCH button to clear the search
screen first, and then press the SPLIT/SINGLE button and the +, – button.
The search may not be performed properly at times depending on
the recorded condition of the index signals.
ALARM SKIP SEARCH
Searches the point where the index signal of alarm recording is written and
plays back approximately 4 seconds where an index signal is written.
<ALARM SKIP SEARCH> In case of forward direction
SKIP COUNT
1. Press the SEARCH button.
• The search screen selected in "SEARCH TYPE" appears.
2. (When the desired search screen is not displayed on the screen • • • )
Change the "SEARCH TYPE" setting in the <SEARCH SELECTION> screen and
then press the CLEAR button to display the "ALARM SKIP SEARCH" screen.
3. Select "EXECUTE(FORWARD)" or "EXECUTE(REVERSE)" and determine such
setting.
• "EXECUTE(FORWARD)": Searches in the forward direction.
• "EXECUTE(REVERSE)": Searches in the reverse direction.
• To cancel searching, press the SEARCH button twice.
• The search result of the alarm skip search is displayed in the SPLIT4 screen display
regardless of "SELECTION CAMERA NUMBER" setting.
• To return to the normal screen, press the SEARCH button twice.
When executing the alarm skip search in the SPLIT4 screen display,
to choose the desired video from the SPLIT4 screen display and display
the video of that camera number in the single screen display, press the
SPLIT/SINGLE button and then press the +, – button.
4. Press the PAUSE button and then press the PLAY button when the desired
video is displayed.
5. To stop ALARM SKIP SEARCH, press the STOP button.
When executing the alarm skip search in the reverse direction with
index signals of less than 4 seconds, that portion may be played back
repeatedly. In this case, press the STOP button to stop the search and
execute alarm skip search in the reverse direction again after the
particular portion has been passed using reverse playback, etc.
The search may not be performed properly at times depending on
the recorded condition of the index signals.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
Present position
01
Alarm
Recording
Index signal
Search
Approx. 4 sec.
play
02
Alarm
Recording
Index signal
Search
Search
Approx. 4 sec.
play
03
Alarm
Recording
Index signal
Search
Approx. 4 sec.
play
<ALARM SKIP SEARCH>
>>EXECUTE(FORWARD)
EXECUTE(REVERSE)
PUSH SEARCH KEY FOR
SEARCH SELECTION
67
Advertisement
Table of Contents
