Table of Contents
Advertisement
Major operations and their functions (continued)
Wired remote control R-400 (supplied)
1
2
3
4
5
6
7
1. SEARCH button
Press to display the search screen.
2. SET UP button
Press to display the <SETTINGS> screen.
3. JOG buttons
Press to move the cursor or change the setting item
while displaying the menu screen.
When pressing during still frame playback, the image
forwards/reverses frame-by-frame.
Press to move the centre point of the magnification
screen vertically or horizontally.
ALARM INTERRUPT button
When pressing this button, the unit does not accept
alarm signals or motion detection for 5 minutes. Dur-
ing this time, ALARM INTERRUPT indicator on the
front panel flashes.
This button does not function while the menu screen
or the search menu is displayed on the monitor.
4. CLEAR button
Press to return to the previous menu layer.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
10
ZOOM
MENU
SPLIT/
SET UP
SEARCH
SINGLE
2
0
1
LOCK
4
ALARM
6
INTERRUPT
5
WARNING
RESET
3
JOG
7
8
9
CLEAR
ENTER
REC/STOP
TIMER ON/OFF
REV.P
PLAY
STOP
PAUSE
REMOTE CONTROL UNIT
5. REC/STOP buttons
When pressing both buttons, recording starts and
the REC indicator on the front panel lights up. When
pressing both buttons during recording, recording
stops and the REC indicator turns off.
During timer recording, recording does not stop even
when both buttons are pressed.
8
9
6. REV.P (REVERSE PLAY) button
When pressing this button during stop mode, the
10
reverse playback speed changes in the 4 grades
(normal } 25 fields/second reverse playback } 30
MB units } 300 MB units} normal).
11
7. PAUSE button
12
When pressing this button during playback, the still
frame playback picture is displayed. When pressing
13
this button again, the unit resumes playback.
14
8. SPLIT/SINGLE button
Press to switch the display between the single screen
display and the split/sequential screen display.
9. ZOOM button
When pressing this button during single screen
display, the screen is magnified by 100%, 200%,
and 400%.
10. +, – buttons
When pressing these buttons during single screen
display, the camera number is switched.
When pressing these buttons during split/sequen-
tial screen display, the screen display is switched
between the split screen display and the single se-
quential screen display. (Single sequential screen
display is skipped during playback.)
LOCK button (+ button)
Pressing this button for more than 3 seconds while
the MAIN switch on the rear panel is turned ON
activates simple lock or password lock.
When the password for unlocking is not set, lock
function executes in simple lock.
When the password for unlocking is set, lock function
executes in password lock.
WARNING RESET button (– button)
Press this button for more than 3 seconds to clear
the on-screen warning display or to clear the data.
11. ENTER button
Press to determine the selection when using menus.
Advertisement
Table of Contents
