Related Manuals for Metronic Touch Box 4
Summary of Contents for Metronic Touch Box 4
-
Page 1: Parental Lock
Digital Satellite Receiver Réf : 441327-4 3500 channels Parental lock 2 scarts 16/9 Compatible DiSEqC 1.2 100-250V~ 50/60Hz VCR / DEMO VIDEO AUDIO MET815... -
Page 2: Important Notice
IMPORTANT NOTICE ! The inside of your Touch Box 4 contains components submitted to high tension. Never open the product, even after having removed the sector cable. In general, audio video products are not related to the earth so you can actually feel electric waves (which are not dangerous) by touching the two pro- ducts simultaneously (or one product and the antenna cable). -
Page 3: Table Of Contents
11 - Classifying channels page 26 12 - Advanced options page 28 13 - Radios page 29 14 - Use with a VCR page 29 15 - Universal remotes page 30 16 - Q / A page 30 Channels Guide page 33 info@metronic.com... - Page 4 3 - Offset arm 8 - Scart cable (21 screened pins) 4 - Universal LNB 9 - F sockets 5 - Mast or wall bracket 10 - Special satellite cable (standard cable is not compatible) (minimum diameter = 40mm) 1,5V info@metronic.com...
- Page 5 12050 V 27500 Sirius 2 NOVY KANAL 4° E 80 cm 11766 H 27500 Hispasat 30.0 Andalucia TV 30° W 80 cm 11810 V 27500 Turk 1C 42.0 TRT 1 42° E 80 cm 11094 V 27500 Table 1 reference’ channel info@metronic.com...
- Page 6 • Incline the antenna (2 degrees) towards the top and start the screening again. • Continue doing so, until the level indicator increases and the image appears. When the channel appears, adjust the wedging (vertically and horizontally) in order to get the best quality. Screw everything tightly apart from the LNB. info@metronic.com...
- Page 7 • On DiSEqC MODE , select DiSEqC 1.0 • On DiSEqC 1.0. , select 1. • Go back up to SATELLITE line and select ASTRA. • Go down to DiSEqC 1.0. and select 2. • Press EXIT 3 times. info@metronic.com...
- Page 8 This section will explain how to install motorised equipment with the motor – item no 450907. If you already have another motor you should refer to its manual. In any case, you will have to do the following : info@metronic.com...
- Page 9 If the level is high but the quality does not increase, this means you are on another satellite and you need to keep screening. info@metronic.com...
- Page 10 N.B Only a 13 key is necessary for the motor. Parts Antenna Mounting accessory Universal LNB Mast or bracket (minimum diameter recommended: 40mm) Digital terminal with remote PAL/SECAM TV Scart cable 21 pins F sockets Specific satellite cable (a standard TV cable will not work) Motor 450907 info@metronic.com...
- Page 11 info@metronic.com...
- Page 12 Those with ‘DOWN’ written on them (3) must allow you to read the motor elevation, as indicated on the following photo. • When the motor is assembled, do not mount it on the mast or bracket straight away. info@metronic.com...
- Page 13 Adjusting the inclination On the European card below (image 3), locate your area which will give you your elevation point (i.e. 31,5° for Glasgow, 38° for Bordeaux etc). Bruxelles info@metronic.com...
- Page 14 Resetting the motor and verifying thrusts Resetting the motor means you must re-initialise its position. You should hence make sure it is at 0°, that is to say facing South. Go to the «DiSEqC 1.2 MENU» and reset the motor. info@metronic.com...
- Page 15 Connect the demodulator to the motor with the long cable prepared at step D. Assembling the antenna Assemble the various parts of the antenna by referring to the manual provided with it. ATTENTION : Handle the antenna with precaution as the edges can be sharp info@metronic.com...
- Page 16 0°, that is to say facing South. Go to the «DiSEqC 1.2 MENU» and reset the motor. CORRECT North South Mounting the LNB head Refer to the LNB or terminal manual. Be careful, some LNBs must be mounted at 45° ! info@metronic.com...
- Page 17 • Number the Atlantic Bird 3 satellite (if in doubt, use «01»). • If the motor has not stopped at the right place, bring it to that place by doing a continuous scanning followed by a step by step one. • Memorise this position for Atlantic Bird 3. info@metronic.com...
- Page 18 Satellites validation You must memorise the correct position of each satellite in the motor. We have explained how to do so with HotBird and Atlantic Bird 3 , so it is now necessary to do the same for Astra... info@metronic.com...
- Page 19 HotBird, as shown on Image 17. Do the same for the other satellites. Image 17 shows the relative position of the main satellites for which channels are pre-pro- grammed in the Metronic receivers. When you are able to receive all satellites, secure the nuts. Your installation is done.
- Page 20 The notice of your previous demodulator should indicate the numbering used. If this is the case, it will be very easy for you to set up the Touch BOX 4. If you do not have access to this information, you should use the one following :...
- Page 21 VIDEO AUDIO HotBird = 1 Astra = 2 DiSEqC 1.0 Atlantic Bird 3 = 3 Please be aware that it will not be possible to bring even one cable down if Astra and Hotbird are received by a monobloc. info@metronic.com...
-
Page 22: Remote Description
‘MOT’ button: allows you to directly access the ‘MOTOR ADJUSTING’ menu. This function will not be activated if the DiSEqC mode is different from DiSEqC 1.2. Allows you to move channels around in the ‘ORGANISE CHANNELS’ menu. info@metronic.com... -
Page 23: Daily Use
• ‘TV/RADIO’ button to listen to radios in digital quality. We advise you to connect your Touch BOX 4 to your Hi-Fi with a 2RCA males / 2RCA males cable. • ‘EPG’ button to view the electronic guide of programs. -
Page 24: Adding Channels
• In the SCANNER option, select ALL if you also wish to add some of the trans- ponder crypted channels. Otherwise, select FTA. N.B. Your Touch BOX 4 does not allow you to view paying channels. However, this option is useful to add channels that have some clear emissions. - Page 25 • In the SCANNER option, select ALL if you also wish to add some of the transpon- der crypted channels. Otherwise, select FTA. N.B. Your Touch BOX 4 does not allow you to view paying channels. However, this option is useful to add channels that have some clear emissions.
-
Page 26: Organising Channels
• Select the channel you wish to place in your favourites list with the 56 arrows and press OK. A symbol will appear in the box. • Press EXIT to leave the screen and save the changes. N.B. Your favourite channels are directly accessible with the ‘FAV’ button. info@metronic.com... -
Page 27: Classifying Channels
• Select the channel you wish to move with the 56 arrows and press the green button. • Select the new position of the channel with the 56 arrows and press OK. • Press EXIT to leave the screen and save the changes. info@metronic.com... -
Page 28: Advanced Options
Advanced options Changing the secret code Your Touch BOX 4 is delivered with a secret code (PIN) which is ‘0000’. This code allows to lock channels that you do not wish others to view, or to protect the confi- guration of the terminal. -
Page 29: Radios
To play a tape, simply press ‘PLAY’ and the VCR will automatically take over the ter- minal. If this is not the case, press the ‘TV/VCR’ button on the remote of your VCR. ATTENTION : It is crucial that you start recording on the VCR. info@metronic.com... -
Page 30: Universal Remotes
Metro- nic code. If none of the Metronic codes work we advise that you start an automatic search. If this fails, it probably is due to your terminal codes not having been ente- red in your universal remote. - Page 31 ASSISTANCE AND ADVICE THIS PRODUCT HAS A 12-MONTH WARRANTY FROM THE DATE OF PUCHASE. DURING THIS PERIOD, IN AN EVENT OF ANY PROBLEMS, PLEASE RETURN TO THE RETAILER WITH PROOF OF PURCHASE info@metronic.com...
- Page 32 info@metronic.com...
- Page 33 11197 V 27500 VenetoSat 10969 H 27500 ARTE 11621 V 27500 3 Channel 10969 H 27500 Cartomanzia L 11621 V 27500 Telenova 10969 H 27500 EDUSAT 11276 V 27500 NTD TV 10969 H 27500 ALL TV 11294 H 27500 info@metronic.com...
- Page 34 11746 H 27500 SAHAR 12436 H 27500 11746 H 27500 AL-ALAM 12436 H 27500 SHARQIYA 11746 H 27500 ALKAWTHAR 12436 H 27500 INFINITY 11746 H 27500 Komala TV 12475 H 27500 AL ARABIYA 11746 H 27500 12475 H 27500 info@metronic.com...
- Page 35 11953 H 27500 SportsWin.TV 10830 H 22000 VIVA 11973 V 27500 Ocko TV 10830 H 22000 VIVA PLUS 11973 V 27500 24.CZ 10830 H 22000 NICK 11973 V 27500 Top TV 10830 H 22000 PREMIERE DIRE 12031 H 27500 info@metronic.com...
- Page 36 22000 Balkanika 11594 V 28800 tv.gusto 12460 H 27500 Evropa TV 11594 V 28800 1-2-3.tv 12460 H 27500 Kanal 8 11594 V 28800 DELUXE MUSIC 12460 H 27500 11594 V 28800 lastminute.TV 12460 H 27500 FANTV 11594 V 28800 info@metronic.com...
- Page 37 12401 V 27500 ITV4 10756 V 22000 Gems.tv 12401 V 27500 ETV5 10786 V 22000 Record TV 12401 V 27500 ETV2 10800 H 22000 TVW Select 12401 V 27500 BBC 1 Wales 10800 H 22000 TV Warehouse 12401 V 27500 info@metronic.com...
- Page 38 Quiz Nation 11305 V 27500 ARY The Musik 11640 V 27500 Jewellery Ch. 11305 V 27500 mta-muslim tv 11659 H 27500 Shop Vector 11305 V 27500 CCTV-9 11659 H 27500 Simply Ideas 11305 V 27500 Inspiration 11659 H 27500 info@metronic.com...
- Page 39 Metronic Ltd Park House 15-23 Greenhill Crescent Watford WD18 8PH www.metronic.com Product made in Asia.
Need help?
Do you have a question about the Touch Box 4 and is the answer not in the manual?
Questions and answers