Installing The Driver Software - Siemens Gigaset 300 Manual

ì
Put the Gigaset USB Adapter 300 in the stand
with the LEDs facing forward (7).
Proceed in the reverse order to disassemble the stand.
About the installation location
Select the location in a way that allows as few obstacles as possible to interrupt the radio
waves. Protect the Gigaset USB Adapter 300 from damp.
The Gigaset USB Adapter 300 should not be placed directly next to other electrical
devices. Electrical equipment can mutually affect each other. The radio waves may
impair the function of other devices.
Install the Gigaset USB Adapter 300 on an even, non-slip ground. Protect especially sen-
sitive surfaces.
For greater reach, we recommend setting the WLAN component up in a central, open
position. For example, avoid installation in recesses, cubbyholes, under a desk or behind
cupboards.

Installing the driver software

Once you have connected the Gigaset USB Adapter 300, the installation will continue
automatically. The operating system's automatic hardware recognition function opens
in order to install the drivers for the Gigaset USB Adapter 300.
Note for installation on Windows XP
If Windows XP SP1 is installed on your system, a query window will open.
ì
Select the option Installing the software automatically and click Next.
If Windows XP SP2 is installed on your system, the Windows Update function offers to
search for a suitable program for you.
ì
Select the option No, not this time and click Next.
ì
Then select the option Installing the software automatically and click Next.
Installing the Gigaset USB Adapter 300
7
15