Unmount The Microsd Card; Use The Device's Microsd Card As A Usb Drive - Kyocera Virgin Event User Manual

Note: The formatting procedure erases all the data on the microSD card, after which the files
CANNOT be retrieved. To prevent the loss of important data, please check the contents
before you format the card.

Unmount the microSD Card

When you need to remove the microSD card, you must unmount the microSD card first to
prevent corrupting the data stored on it or damaging the microSD card. Before removing the
microSD card, close all running applications on your device and save any data first.
1. Press Home
2. Touch Unmount SD card > OK.
3. Remove the microSD card. See

Use the Device's microSD Card as a USB Drive

To transfer music, pictures, and other files from your computer to your device's microSD card,
you need to set the device's microSD card as a USB drive.
1. Connect the device to your computer using the supplied USB cable.
2. The PC connection screen automatically opens.
– or –
If you see
the USB connection notification.
3. Touch Mass Storage > Done > OK. See
4. On your computer, the connected device and the inserted microSD card are recognized
as two removable disks. Navigate to these removable disks and open the one
containing the data from the microSD card.
5. Do one of the following.
 Copy files from the computer to the root folder on the device's storage card.
 Copy files from the device's storage card to a folder on your computer or computer
desktop.
6. After copying the files, unmount the removable disks (that is, the connected device) as
required by your computer's operating system to safely remove your device, and
disconnect the device from the computer.
microSD Card
> Menu , and touch System settings > Storage.
Remove the microSD
on the status bar, slide it down to open the Notifications panel and touch
Card.
PC Connection.
161