Tuner Setup; Tv Setup - Kenwood DNX7210BT Instruction Manual

Return to the Top page
Radio, TV

Tuner Setup

You can set tuner related parameters.
1
Touch [ ] in the control screen.
Multi function menu appears.
2
Touch [SETUP] in the multi function
menu.
SETUP Menu screen appears.
3
Touch [Source].
Source SETUP Menu screen appears.
4
Touch [TUNER SETUP] in the list.
TUNER SETUP screen appears.
5
Set each item as follows.
NEWS
Sets a news bulletin interrupt time. Default is
"OFF".
AF
When station reception is poor, automatically
switches to the station that is broadcasting
the same program over the same Radio Data
System network. Default is "ON".
Regional
Sets whether to switch to the station only
in the specific region using the "AF" control.
Default is "ON".
52 52
Auto TP Seek
When traffic information station reception is
poor, automatically searches for a station that
can be received better. Default is "ON".
Language Select
Selects a display language for the PTY function.

TV Setup

You can set the TV signal receiving areas.
NOTE
• Each operation in this section can be started from
the Top Menu screen. For details, see Operating
With The Top Menu Screen (P.17).
1
Touch [ ] in the control screen.
Multi function menu appears.
2
Touch [SETUP] in the multi function
menu.
SETUP Menu screen appears.
3
Touch [Source].
Source SETUP Menu screen appears.
4
Touch [TV SETUP] in the list.
TV SETUP screen appears.
Return to the Top page
Radio, TV
Set each item as follows.
TV1 Area/TV2 Area
Sets the present TV1 or TV2 receiving area.
Touch [SET], and select the area and number.
This function is available only when
KTC-V301E/KTC-V300E optional accessory is
connected.
On Screen TV
Sets how to display the information of the TV.
Auto (Default): I nformation appears for 5
seconds when updated.
OFF: D oes not display any information.
53