Table of Contents
Advertisement
1.
Press and hold SHIFT on any bus. If you use the
Program bus or on-air Key bus, you may affect
on-air images.
2.
Press MEDIA 1 or MEDIA 2 to select a
Media-Store channel.
3.
Press the Browse knob.
4.
Press NEXT.
5.
Press the Place knob to lock or unlock the Place
value. When locked, the Place value will be
surrounded by brackets [].
6.
If you locked the Place value, use the Place
knob to select the locked value. You can choose
from the following:
• INT (0) — internal storage (this feature not yet
implemented)
• USB (1) — USB drive (default)
7.
Press the Media knob to lock or unlock the Bank
value. When locked, the Bank value is enclosed
in brackets [].
8.
If you locked the Bank value, use the Bank knob
to select the locked value.
Loading Media by Media Number
Once an image has been assigned a Media number,
it can be quickly reloaded by typing the corresponding
Media number using the Wipe Pattern buttons. The
procedure is slightly different if you have locked the
Place and Bank values.
To load an image or animation by Media number
with a locked place and bank number:
4
3
1.
If you are loading from a USB drive, insert it into
the USB port on the switcher.
2.
Press and hold SHIFT on any bus. If you use the
Program bus or on-air Key bus, you will affect
on-air images.
3.
Press MEDIA 1 or MEDIA 2 to select the
Media-Store channel to load into.
4.
Press the Wipe Pattern button corresponding to
the item number (in the locked Place and Bank)
of the image you wish to load.
2
Note:
• Wait 5 seconds after inserting a USB drive into the
USB port before using it.
• Entering a Media number of 000 clears the image
from the selected Media-Store channel.
To load an image or animation by Media number
without a locked place or bank number:
4
3
1.
If you are loading an image from a USB drive,
insert it into the USB port on the switcher.
2.
Press and hold SHIFT on any bus. If you use the
Program bus or on-air Key bus, you will affect
on-air images.
3.
Press MEDIA 1 or MEDIA 2 to select the
Media-Store channel to load the image into.
4.
Use the Wipe Pattern buttons to type the Media
number corresponding to the image you wish to
load. Type only the unlocked portion of the Media
number (if the Place value is locked, do not type
a Place value).
5.
Press the Select knob to load the image.
Note:
• Entering a Media number of 000 clears the image
from the selected Media-Store channel.
Modifying Media-Store Image Attributes
You can alter the appearance of a Media-Store image
by modifying display parameters. The parameters
you can modify are:
• X and Y Position
• Shaped/Unshaped
• Media number
To modify the position of a Media-Store image:
3
2
5
2
4
5
1
53
Advertisement
Table of Contents
