Reset Options - JVC KM-H2500 Manual

Hide thumbs Also See for KM-H2500:
Table of Contents

Advertisement

second Wipe Pattern button to designate the
memory register.

Reset Options

You can restore the entire switcher or individual
settings to default values. Menu items can also be
reset.
You can also capture the state of the switcher as a
user-defined default, allowing you to reset to those
settings at any time.
You switcher is shipped with the following default
settings:
Table 9 Switcher Factory Default Settings
Item
Selected Source (all buses)
Key Types
Clip
Gain
Transition Limit
Key Status
Media-Store Channels
Matte Color
Wash
Selected Wipe Pattern
Wipe Parameters
Transition Type
Masks
Main Transition rate
Key Transition rate
36
Default Value
Black
Auto-Select
Linear
Linear
None
Off-air
Empty
Hue: 30.5%
Sat: 100%
Lum: 50%
Off
Top-Left Pattern Button
Clip: 0.0%
Gain: 0.0%
Transp: 0.0%
Invert: Off
Dissolve
Off
59.94 Hz Video
Formats: 15 frames
50 Hz Video Formats:
13 frames
59.94 Hz Video
Formats: 8 frames
50 Hz Video Formats: 7
frames
Table 9 Switcher Factory Default Settings
Item
Chroma Key
Aux bus
Output Sync
Frame Sync
Power Save
Note:
• Default transition rates vary depending on the
frequency of the selected video format.
Configuring Default Settings
You can customize any of the default parameters and
save them as a user-defined default.
To configure user-defined defaults:
2
3
5
1.
Configure any of the settings in the previous list
as desired. This will become the new default
state.
2.
Press MENU.
3.
Press the RESET Wipe Pattern button.
4.
Use the Aux knob to select whether Aux buses
are included in the reset. You can choose from
the following:
• Reset — Aux buses are included in the reset.
• NoRst — Aux buses are not included in the
reset.
5.
Press NEXT until Media is displayed.
6.
Use the Media knob to select the Media-Store
channel you wish to configure.
7.
Use the Reset knob to select whether the
Media-Store channel is included in the reset. You
can choose from the following:
• No — The Media-Store channel is not reset.
Any loaded image or animation is retained.
• Yes — Any loaded image or animation is
removed and the Media-Store channel is
returned to the default state.
Default Value
Edge: 0.0%
Shadow: 100.0%,
Gain: 100.0%
Spill: 0.0%.
Not Fixed
Off
Off
20 min
6
7
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km-h3000

Table of Contents