Advertisement
Operation 8030C
Calibration
NOTE: Your thermostat comes from the factory calibrated to + or - 1
temperature. It is an accurate instrument. If you want your thermostat to display
the same temperature as another thermometer in your home, you can adjust its
calibration.
To change the calibration:
The unit must be in the HEAT or COOL mode.
Press the MENU button.
Press the Temp Up/Temp Down arrows to adjust the temperature reading.
CALIBRATE DISPLAY ON will appear.
Press HOME to save the new setting.
Customer Support: 888-515-2585 or Visit our webiste www.ritetemp-thermostats.com
Made in China
o
F actual
401-011
Advertisement
Table of Contents
Related Manuals for ritetemp 8030C
Summary of Contents for ritetemp 8030C
- Page 1 The unit must be in the HEAT or COOL mode. Press the MENU button. Press the Temp Up/Temp Down arrows to adjust the temperature reading. CALIBRATE DISPLAY ON will appear. Press HOME to save the new setting. Customer Support: 888-515-2585 or Visit our webiste www.ritetemp-thermostats.com Made in China 401-011...
-
Page 2: Control Panel
Basic Screens The MODE SWITCH of the 8030C must be in the HEAT or the COOL position to access all control functions. The 8030C Thermostat has 3 basic screens. The HOME screen is displayed when unit is operating your system. -
Page 3: Menu Screen
MENU screen Displayed when the MENU button is pressed from the HOME screen. Lock Program Return Set Day Touch this to Touch for 5 sec HOME Touch this area to set set temperature to lock or unlock the day of the week. display. -
Page 4: Configure
1 Configure Press MENU to configure the thermostat (from HOME screen). Set day of the week - Touch the Day of the week area to cycle through the days of the week to select the current day. Set time of day - Touch the Time of Day arrows to move the time selection forward or backward until it displays the Backward... -
Page 5: Program
3 Program NOTE: 60 Second Rule-During programming, if a button is not pushed in 60 seconds, the unit will return to the home screen. Everything you have changed while programming will automatically be saved. Press PROGRAM to go to the programming screen. Select HEAT with the HEAT/Cool MODE switch. -
Page 6: Manual Commands
Manual The 8030C has 3 manual override commands. These are accessed by touching the Current Temp Display at the HOME screen (center of screen). Target Temperature Return HOME HOLD Touch this area to set a comfortable target temp for the system to hold until you return and remove HOLD. -
Page 7: Special Features
The furnace will cycle more at the lower numbers as it tries to keep your set point constant. Filter The 8030C has a feature that keeps track of actual furnace run time and reminds you to periodically replace your system's air filter. Press MENU and touch FILTER icon.
Need help?
Do you have a question about the 8030C and is the answer not in the manual?
Questions and answers