Speed Adjustment Guide - Genie Garage Door Opener Programming Manual

And programming addendum to garage door opener manuals
Hide thumbs Also See for Garage Door Opener:
Table of Contents

Advertisement

ADJUSTMENT GUIDE -
Speed settings are pre-programmed at the factory
for the maximum speed. Speed settings should not
need adjustment with this unit.
However, travel speed for the opener in both the
open and close directions can be adjusted to slower
speeds to minimize normal wear for heavy sectional
doors.
NOTE: One piece doors are automatically set during
Limits programming to the slowest speed and
opener speed cannot be reset for one piece doors.
Default LED display is the current Speed setting
LED Speed indicator colors
MAXIMUM
MID
SLOW
22
SPEED SETTINGS
Speed Level
Speed Level LED indicator colors
©2011 The Genie Company
FOR HELP-1-800-35-GENIE OR WWW.GENIECOMPANY.COM
CHANGE SPEED SETTING
Use this guide to ADJUST powerhead SPEED settings.
There are three (3) Speed settings available on this
unit for the open and close directions. Door type
(one piece or sectional), door weight and balance,
and condition of door components / track affect
door speed. Speed adjustment may not be available
for some installations depending on these factors.
PROGRAM
1. Press
on the powerhead and hold until both
SET
lights turn steady ON. Release button.
Lights go out and Round BLUE light comes ON.
2. Press
two times and the Round BLUE and Long
BLUE lights come ON.
PROGRAM
3. Press
once to enter the Speed Programming
SET
menu. The round LED will flash BLUE 3 times,
then the current Speed setting for UP travel will
display on the LEDs. See table below.
4. Press
to raise or
within the available range.
NOTE: Faster door speeds may not be available.
PROGRAM
5. Press
to set UP Speed level. The long LED will
SET
flash BLUE 3 times, then the current Speed setting
for DOWN travel will display on the LEDs.
6. Press
to raise or
settings within the available range.
NOTE: Faster door speeds may not be available.
PROGRAM
7. Press
to set DOWN Speed level. Both LEDs flash
SET
BLUE to confirm.
to lower UP Speed settings
to lower DOWN Speed
Powerhead LEDs
Round LED
Long LED
Red
Red
Purple
Purple
Blue
Blue
Red
ON
Purple
Purple
ON
Blue
ON
3/2011
Red
ON
ON
Blue
ON

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Garage Door Opener and is the answer not in the manual?

Questions and answers

Dale Anderson
February 2, 2025

Where in manufacture date on Genie model 4062 PowerMax 1500 Revolution Series?

This manual is also suitable for:

IntellicodePowermax 15004062

Table of Contents

Save PDF