Pioneer DVD-V8000 Product Information Bulletin

P I
RODUCT NFORMATION
DVD-V8000 – Correction for External Field Lock Synchronization
O :
VERVIEW
In specific cases, customers with multiple DVD-V8000s may need to synchronize playback between
two or more players. This industrial DVD player model provides analog and digital output syncing.
The DVD-V8000 employs a special audio video processing circuit to produce the best possible output
signals. This circuit allows the user to perform a number of output adjustments to both the audio and
video signals. When external sync is enabled, the output video signal for an interlaced analog video
signal is locked to field two instead of the normal field one lock. To correct the field lock issue, update
the industrial DVD player's firmware to version 1.12. This firmware offers two sync modes per video
type, two for NTSC and two for PAL.
If you need to synchronize playback for your DVD-V8000 installation(s), please contact Pioneer and
request firmware update version 1.12 which corrects the external sync code. This update also adds
functionality to your DVD-V8000. Firmware version 1.12 contains the following changes:
Corrects External Sync code (this option is in the Advanced Features menu)
Protects against lock-ups when using specific RS-232C commands
Adds the ability to backup and load the weekly timer setting using a USB Memory device
The industrial DVD player DVD-V8000 with firmware version 1.12 offers two external sync modes for
both NTSC and PAL signals.
NTSC Mode 1 offers full video output adjustments plus DVI and progressive video out
NTSC Mode 2 provides external sync Interlaced video locking to field 1 with DVI and
Component Video Out fixed at Interlaced (NTSC Mode 2 is compatible with the DVD-V7400
external sync operation)
PAL Mode 1 has DVI-D and Advanced Video Adjustments enabled and Component Video
Out, both Interlaced and progressive, as selectable
PAL Mode 2 performs in the same manner as the DVD-V7400 with Advanced Video
Adjustments disabled, DVI-D disabled, and Component Video Out fixed at Interlaced (PAL
Mode 2 is compatible with the DVD-V7400 external sync operation)
Note: When locking to external sync on an updated player, NTSC Mode 2 and PAL Mode
2 disable the DVI output, analog progressive output, and all audio video playback
adjustments
for color synchronization. The player only supports vertical timing for field
synchronization.
Created by HBG-A Product Development & Technical Support
Pioneer Electronics (USA), Inc.
B
ULLETIN
However, this firmware does NOT add support of sub-carrier timing
.
(800) 872-4159
PIB # 152701
Page 1 of 4
Released: 23 Oct 2006