Hitachi GR2000 Series Installation Manual page 244

Accommodated
RP condition
IPv6 relaying
RP-A1, S/W processing
RP-CRP-D
RP-C6, RP-D6 H/W processing
(Note: 1) If RP-C6 and RP-D6, and RP-ALRP-C and RP-D are mounted in a mixed way, the IPv6 function can only be
used in RP-C6 and RP-D6. The IPv6 function cannot be used in RP-ALRP-C and RP-D.
(Note: 2) RP-CV and RP-DV are not supported in ROUTE -OS6.
4.2.12.2 IPv6 function restrictions regarding the routing processing mechanism (RP) mounting
conditions
Replacement of RP by inserting and removing a cock
When replacement of RP is performed by inserting and removing a cock when the
IPv6 function is used, the device requires re-actuation if replaced from RP-C6 to
RP-ALRP-C.RP-D, or from RP-ALRP-C.RP-D to RP-C6 and RP-D6.
New expansion of RP
The device requires re-actuation if RP-C6 and RP-D6 are additionally installed to
IPv6 providing function
Filter
S/W processing None
H/W processing H/W processing
QoS IP tunneling
RM processing
RP processing
IPv6 multicast
None
H/W processing