Trimkits And Decoratorpanels - GE Profile 24 CustomStyle Owner's Manual

Trimkits and decoratorpanels.
For CustomSiyle models
Read these instructions completely and carefully.
Before YouBegin
Some models are equipped with trim kits that aflow you to install door panels. You can order pre-cut
black or white decorator panels from GE Parts and Accessories, 800-626-2002, or you can add wood
panels to match your kitchen cabinets.
Panels less than 1/4" (6 mm) thick
When installing wood panels less than l/4" (6 ram) thick, you need to oeate a filler panel, such as 1/8"
cardbomd, that _ill fit between the time of tile door and tile w_)od panel. Ify_)u are installing tile pre-cut
decorator panels, pre-cut filler panels me included in the kit. The combined thickness of the decorator or
wood panel and the filler panel should be 1/4" (6 ram).
3/4" (19 mm) or Raised Panel
A raised panel design screwed or glued to a 1/4" (6 ram) thick backing, or a 3/4" (19 ram) routed board
can be used. The raised portion of the panel must be thbricated to permit clearances (fiat least 2" (51 ram)
fiom the handle side ti)r fingertip clearance.
Weightlimitations for custom panels:
FreshFood35 lb. (16kg) max.
FreezerDoor25 lb. (11kg) max.
2"(51 mm)
Clearance
HandleSide
Appearance
Panel
1/4" 16mm}
ThickBacking
Doer
21