About The Refrigerator Doors - GE Profile 24 CustomStyle Owner's Manual

About storage drawer removal
Not all features are on all models.
i I
WhenreplacingflTedrawers,make
sureyou slidethemflTrough both
drawerguidesonthe rightside.
Drawer Removal
Drawers (an easily be removed 1)y tilting up
slightly and pulling past the stop lo(ation.
Removethe door bibs from the fresh food door
before remov/bgthe drawer
To remove the shelf above tile top drawer,
first remove the top drawer and any food on
the shelf. Then tilt the shelf up at the fiont
and lift it up and out of the tracks.
To repla(e tile shelf, raise tile shelffiont
slightly and place the top hooks in the
lowest large ua(k slots. Then lower the
fiont of the shelfuntil it is level.
To remove the (hawers when the flesh fi)od
comparunent door cannot be opened fillly
you need to roll the refrigerator tbrward
until the door can be fillly opened, In some
cases this will require m{)ving the
refiigerator to the left as you roll it out.
About the refrigerator doors
When the door is only partially open
it will automatically close.
Beyond this stop the door will
stay open.
Refrigerator Doors
Tile refiigerator doors may teel ditterent
than the ones you are used to, The special
door opening/closing teaune makes sure
the doors close all tile way and are se(urely
sealed,
When opening and closing the door y()u
will notice a stop position, If the door is
opened past this stop point, the door will
remain open to allow you to load and
unload t_o(1 more easily. When the door is
only partially open it xdll automatically
dose.
The resistance you teel at the stop
position will be redu(ed as tile door
is loaded with food.
/2