Lan Port - Sanyo PJ-Net Owner's Manual

Setting for controlling the equipment connected to the serial port from
the computer
Serial Control :Selects "External"
:Sets according to the com-
Port
puter specified port no. Do
not use port no. 10000*
:Sets according to the com-
Other Settings
munication condition of the
equipment
Setting for controlling the projector from the serial controller connect-
ed to the serial pot
Serial Control :Selects "Projector"
Port :Not specified. Do not use
port no. 10000*
Other Settings :Sets according to the com-
munication condition of
serial controller
Setting fro controlling the projector from the computer through the

LAN port

Serial Control :Not specified
Port :Not specified
Other Settings :Not specified
* The port no. of the computer must be used with 10000.
*1 This product will restart automatically when "Port" or "Serial Control" is changed and it
takes about 40 seconds.
*2 The reserved port numbers are http (80), ftp (21), telnet (23), etc. The port no. 10000 is
reserved to control the projector through the LAN port.
Exclusive driver software for control of the external equipment is required. This product does
not provide any driver software. Please consult your local dealer.
There are 2 types of RS-232C serial cable, Normal(Straight) and Reverse(Cross) type. Usually,
when connecting between this product and a projector or a computer, use Reverse type of
serial cable. When connecting DVD player etc., use Normal type.
2 .
.
2
the
Serial port setting
87
Network Unit
OWNER'S MANUAL