Connection Of Lan Cable; Owner's Manual - Sanyo PJ-NET ORGANIZER POA-PN10 User Manual

[2] Connection of LAN cable

To connect to the network, it is required to use the UTP (Unshielded Twisted Pair)
strait cable with RJ-45 plug. There are two different types of cables depending on
whether the network is constructed with 10Base-T or 100Base-TX. Prepare the Hub
(10Base-T or 100Base-TX) to distribute the network cable if required.
1
Disconnect the AC plug from the projec-
tor.
2
Connect the UTP strait cable to the LAN
port on the Network Unit.
3
Connect the UTP strait cable to the hub.
Hub
(10BaseT, 100Base-TX)
Use the UTP cross cable when you connect the computer and projector directly not using the
hub.
When you connect the projector into the 10Base-T network, use cable with category 3 or 5.
When you connect the projector into the 100Base-TX network, use cable with category 5.
The length of cable between hub and projector should be less than 100m.
UTP strait cable
Connection of LAN cable
Projector
Network Unit

OWNER'S MANUAL

13