GE Appliances 24 Owner's Manual page 35

Route the Copper Tubing and Connect It to the Shutoff Valve
Route the (opper tubing beBveen the cold water line and the reti'igerator.
Route the tubing through a hole drilled in the wall or tloor (behind the
retiigerator or ac{jacent base cabinet) as close to the wall as possible.
Besurethereis sufficient e xtratubing [about8 feet(244cm)coiledinto3 turns of about
10"(25cmldiameter]toallowthe refrigerator t omoveout fromthewaftafter installation.
Pla(e the compression nut and terrule (sleeve) onto the end of the tubing and
connect it to the shutotl:valve.
Make sure the tubing is full], inserted into the valve. Tighten the compression
nut securely.
Saddle-Type S hutoffValve r-r|
_,_ jmpmssioe Nut
Nut
I\
OutletValve _r_ule (sleeve}
Turn On the Water and Flush Out the Tubing
Turn the main water supply on and tlush out the tubing- until the water
is clear.
_{ Shut the water oil" at the water valve alter about one quart (l 1_)of x_wterhas
been tlushed through the robing.
!!i i!i
o0_ ......................................