Preparingto Instafithe Refrigerator - GE Appliances 24 Owner's Manual

Preparing to install the refrigerator.
Read these instructions completely and carefully.
Water Supplyto the Icemaker
Y()tl'will need to conrlect the icenlaker to a cold water line.
A water suppl} kit (containing- copper tubing, shutoffvah_e, thtings
arm instructior_s) is available at extra cost ti'orn your dealer.
RefrigeratorLocation
l)o not install the ret_'ig-erator where the temperature will go beh)w
t)O°F, (I(')°C.) because it will not run ()lien enough to maintain
proper temperatures.
Install it on a tloor strong enough to support it fulh loaded.
Clearances
Allow the tblloMng clearances tbr ease of installation, proper air
circulation and plumbing and electrical connections:
24" Model 28"Model 30" Model
Sides l/8" (3 ram) l/8" (3 ram) l/8" (3 ram)
Top 1" (25 ram) 1/8" (3 ram) 1/8" (3 mm)
Back 1/2" (13ram) 1/2" (13ram) 1/2" (13ram)
If built-ie,allow7/8"(22 ram)forhingecovers,
If the reti'igerator is against a wall on either side. allow 3/4"
(19 ram) for door clearance.
23!i