Page 2
The M-Audio Bass Management system also includes several additional features that many users will find handy. These features include subwoofer loudness limiting (when adding rerouted main signal to the LFE, subwoofer phase inversion, and time-alignment on all channels.
Page 3
Bass Management The “General Settings” section sets global parameters for the Bass Management system. < O n/Off – Bass Management is only active when the “On” radio button is selected. If the “Off” radio button is selected, all parameters of the Bass Management system will be deactivated.
Page 4
Bass Management The “Speaker freq. Response” section allows you to configure crossover points and routing options for your sound system. < C rossover Freq (in Hz) – The Bass Management system re-routes low frequency sounds from main speaker channels to the subwoofer. These radio buttons allow you to set the “crossover”...
Need help?
Do you have a question about the Delta 1010 and is the answer not in the manual?
Questions and answers